Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
default-metric – assigns one distance metric to all routes learned using the redistribute
command.
distribute-list in
Configure a filter for incoming routing updates.
S5000
Syntax
distribute-list prefix-list-name in [interface-type slot/port]
To delete the filter, use the no distribute-list prefix-list-name in
command.
Parameters
prefix-list-name
in
Enter the name of a configured prefix list followed by the keyword in.
interface-type
slot/port
(OPTIONAL) Enter the interface type and slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ip prefix-list – enters PREFIX-LIST mode and configures a prefix list.
1083