Command Line Reference Guide

45
Routing Information Protocol (RIP)
Routing information protocol (RIP) is a distance vector routing protocol. The Dell Networking operating software (FTOS)
supports both RIP version 1 (RIPv1) and RIP version 2 (RIPv2) on the S5000.
NOTE: For more information about configuring RIP, refer to the FTOS Configuration Guide .
auto-summary
Restore the default behavior of automatic summarization of subnet routes into network routes. This command applies
only to RIP version 2.
S5000
Syntax
auto-summary
To send sub-prefix routing information, use the no auto-summary command.
Defaults Enabled.
Command Modes ROUTER RIP
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip rip
Update all the RIP routes in the FTOS routing table.
S5000
Syntax
clear ip rip
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command triggers updates of the main RIP routing tables.
1079