Command Line Reference Guide

100 isolated Yes Te 2/2,4-6
200 isolated Yes Te 3/2,4-6
Example
(Community)
FTOS# show vlan private-vlan community
Primary Secondary Type Active Ports
------- --------- --------- ------ -----------
10 primary Yes Te 2/1,3
101 community Yes Te 2/7-10
20 primary Yes Po 10, 12-13
Te 3/1
201 community No
202 community Yes Te 3/11-12
Example
(Specific)
FTOS# show vlan private-vlan interface Te 2/1
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 primary Yes Te 2/1
Usage
Information
If the VLAN ID is that of a primary VLAN, the entire private VLAN output is displayed, as shown
below. If the VLAN ID is a secondary VLAN, only its primary VLAN and its particular secondary
VLAN properties are displayed, as shown in the second Example.
Example
FTOS# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Te 2/1,3
102 isolated Yes Te 0/4
101 community Yes Tei 2/7-10
Example
FTOS#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Te 0/2
102 Isolated Yes Te 0/4
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
S5000
Syntax
show vlan private-vlan mapping
Defaults none
1075