Command Line Reference Guide

wred-profile
Create a WRED profile and name the profile.
S5000
Syntax
wred-profile wred-profile-name
To remove an existing WRED profile, use the no wred-profile command.
Parameters
wred-profile-
name
Enter your WRED profile name in character format (16 character
maximum). Or use one of the pre-defined WRED profile names. You
can configure up to 26 WRED profiles plus the five pre-defined
profiles, for a total of 31 WRED profiles.
Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g,
wred_teng_y, wred_teng_g.
Defaults The five pre-defined WRED profiles. When you configure a new profile, the minimum and
maximum threshold defaults to predefined wred_ge_g values.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the default pre-defined profiles or configure your own profile. You cannot delete the pre-
defined profiles or their default values. This command enables WRED configuration mode—
(conf-wred).
Related
Commands
threshold – specifies the minimum and maximum threshold values of the WRED profile.
1067