Command Line Reference Guide

An input policy map with both Trust and Class-map configuration, the Class-map rules are
ignored and only the Trust rule is programmed in the CAM. In such an instance, the Estimated
CAM output column will contain the size of the CAM space required for the Trust rule and not
the Class-map rule.
The following describes output from the text cam-usage service-policy input
policy-map stack-unit command shown in the Example below.
Field Description
Stack-Unit Indicates the stack-unit number.
Portpipe Indicates the portpipe number.
CAM Partition The CAM space where the rules are added.
Available CAM Indicates the free CAM space, in the partition, for the classification
rules.
NOTE: The CAM entries reserved for the default rules are not
included in the Available CAM column; free entries, from the
default rules space, can not be used as a policy map for the
classification rules.
Estimated CAM
per Port
Indicates the number of free CAM entries required (for the
classification rules) to apply the input policy map on a single
interface.
NOTE: The CAM entries for the default rule are not included in this
column; a CAM entry for the default rule is always dedicated to a
port and is always available for that interface.
Status (Allowed
ports)
Indicates if the input policy map configuration on an interface
belonging to a stack-unit/port-pipe is successful—Allowed (n)—or
not successful— Exception. The allowed number (n) indicates the
number of ports in that port-pipe on which the Policy Map can be
applied successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the output
contains only L2ACL CAM partition entries.
Example
FTOS# test cam-usage service-policy input pmap_l2 stack-unit
all
For a L2 Input Policy Map pmap_l2, the output must be as
follows,
Stack-| Portpipe| CAM Partn| Avail CAM| Est CAM/Port| Status
unit
------------------------------------------------------------
0 0 L2ACL 500 200 Alwd(2)
0 1 L2ACL 100 200 Excptn
1 0 L2ACL 1000 200 Alwd(5)
1 1 L2ACL 0 200 Excptn
1064