Command Line Reference Guide

ManualsBrandsDell Manualscomputer componentsNetworking S5000

1051

layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class

Map. The default is Layer 3.

Defaults Layer 3

Command Modes INTERFACE

Command History

Version 9.0(1.3) Introduced on the S5000.

Usage

Information

You can attach a single policy-map to one or more interfaces to specify the service-policy for

those interfaces. A policy map attached to an interface can be modified.

NOTE: The service-policy commands are not allowed on a port channel. The

service-policy input policy-map-name command and the service-

class dynamic dot1p command are not allowed simultaneously on an interface.

However, the

service-policy input command (without the policy-map-name

option) and the service-class dynamic dot1p command are allowed on an

interface.

Commands

policy-map-input – creates an input policy map.

service-policy output

Apply an output policy map to the selected interface.

S5000

Syntax

service-policy output policy-map-name

To remove the output policy map from the interface, use the no service-policy

output policy-map-name command.

Parameters

policy-map-name

Enter the name for the policy map in character format (16 characters

maximum). You can identify an existing policy map or name one that

does not yet exist.

Defaults none