Command Line Reference Guide

qos-policy-input – creates a QoS output policy.
rate-shape
Shape traffic output as part of the designated policy.
S5000
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). Specify a value after the keyword as a multiple of 64.
rate Enter the outgoing rate in multiples of 10 Mbps. The range is 10 to
10000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is 0 to 10000. The
default is 10.
Defaults Burst size is 10 KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
rate-shape can be applied only as an aggregate policy. If it is applied as a class-based
policy, rate-shape does not take effect.
Related
Commands
rate shape – shapes traffic output as part of the designated policy.
qos-policy-output – creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S5000
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input
policy-map-name [layer2] command.
Parameters
policy-map-name Enter the name for the policy map in character format (16 characters
maximum). You can identify an existing policy map or name one that
does not yet exist.
1052