Command Line Reference Guide

qos-policy-input
Create a QoS input policy on the router.
S5000
Syntax
qos-policy-input qos-policy-name [layer2]
To remove an existing input QoS policy from the router, use the no qos-policy-input
qos-policy-name [layer2] command.
Parameters
qos-policy-name Enter the name for the policy map in character format (32 characters
maximum).
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class
Map. The default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to specify the name of the input QoS policy. After the input policy is
specified, rate-police can be defined. This command enables Qos-Policy-Input Configuration
mode— (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules are deleted
and re-added automatically to ensure that the order of the rules is maintained. As a result, the
Matched Packets value shown in the show qos statistics command is reset.
Related
Commands
rate police – incoming traffic policing function.
qos-policy-output
Create a QoS output policy.
S5000
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-
policy-name
command.
Parameters
qos-policy-name Enter your output QoS policy name in character format (32 characters
maximum).
1050