Command Line Reference Guide

match mac dot1p
Configure a match criterion for a class map based on a dot1p value.
S5000
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list Enter a dot1p value. The range is 0 to 7.
Defaults none
Command Modes CLASS-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must enter the class-map command in order to access this command. After the class
map is identified, you can configure the match criteria.
Related
Commands
class-map – identifies the class map.
match mac vlan
Configure a match criterion for a class map based on VLAN ID.
S5000
Syntax
match mac vlan number
Parameters
number Enter the VLAN ID. The range is 1 to 4094.
Defaults none
Command Modes CLASS-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must enter the class-map command in order to access this command. You can match
against only one VLAN ID.
Related
Commands
class-map – identifies the class map.
1047