Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
vlan forward-delay – changes the time interval before FTOS transitions to the Forwarding state.
vlan hello-time – change the time interval between BPDUs.
vlan max-age – changes the time interval before PVST+ refreshes.
show spanning-tree pvst – displays the PVST+ configuration.
vlan forward-delay
Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to the
Forwarding state.
S5000
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, use the no vlan forward-delay command.
Parameters
vlan vlan-range Enter the keyword vlan followed by the VLAN number(s). The range
is 1 to 4094.
forward-delay
seconds
Enter the keywords forward-delay followed by the time interval,
in seconds, that FTOS waits before transitioning PVST+ to the
forwarding state. The range is 4 to 30 seconds. The default is
15
seconds.
Defaults 15 seconds
Command Modes CONFIGURATION (conf-pvst)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
vlan bridge-priority – sets the bridge-priority value.
vlan hello-time – changes the time interval between BPDUs.
vlan max-age – changes the time interval before PVST+ refreshes.
show spanning-tree pvst – displays the PVST+ configuration.
1032