Command Line Reference Guide

show running-config monitor session
Display the running configuration of all monitor sessions or a specific session.
S5000
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-
config monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range 0 to
65535.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The monitoring command is saved in the running configuration at the Monitor Session
mode level and can be restored after a chassis reload.
Example
FTOS#show running-config monitor session
!
monitor session 8
source TenGigabitEthernet 10/46 destination
TenGigabitEthernet 10/1 direction rx
!
monitor session 11
source TenGigabitEthernet 10/0 destination
TenGigabitEthernet 10/47 direction rx
FTOS#show running-config monitor session 11
!
monitor session 11
source TenGigabitEthernet 10/0 destination
TenGigabitEthernet 10/47 direction rx
Related
Commands
monitor session – Creates a session for monitoring.
show monitor session – Displays a monitor session.
1020