Command Line Reference Guide
40
PIM-Source Specific Mode (PIM-SSM)
FTOS supports protocol-independent multicast (PIM)-source specific mode (PIM-SSM) commands on the S5000.
This chapter contains the following sections:
• IPv4 PIM Commands
• IPv4 PIM-Source Specific Mode Commands
• IPv6 PIM Commands
• IPv6 PIM-Source Specific Mode Commands
IPv4 PIM Commands
The following commands apply to IPv4 PIM-SM, PIM-SSM, and PIM-DM.
• clear ip pim tib
• debug ip pim
• ip pim dr-priority
• ip pim graceful-restart
• ip pim neighbor-filter
• ip pim query-interval
• show ip pim interface
• show ip pim neighbor
• show ip pim tib
IPv4 PIM-Source Specific Mode Commands
The IPv4 PIM-source specific mode (PIM-SSM) commands are as follows.
• ip pim ssm-range
• ip pim join-filter
• show ip pim ssm-range
1013