Command Line Reference Guide
ipv6 pim query-interval
Change the frequency of IPv6 PIM router-query messages.
S5000
Syntax
ipv6 pim query-interval seconds
To return to the default value, use the no ipv6 pim query-interval seconds
command.
Parameters
seconds
Enter a number as the number of seconds between router query
messages. The range is 0 to 65535. The default is 30 seconds.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ipv6 pim neighbor-filter
Prevent the system from forming a PIM adjacency with a neighboring system.
S5000
Syntax
ipv6 pim neighbor-filter {access-list}
Parameters
access-list
Enter the name of a standard access list. Maximum 16 characters.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Do not enter this command before creating the access-list.
1005