Command Line Reference Guide

Outgoing interface list:
TenGigabitEthernet 8/0
show running-config pim
Display the current configuration of PIM-SM snooping.
S5000
Syntax
show running-config pim
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show running-config pim
!
ip pim snooping enable
Related
Commands
ip pim snooping – enables PIM-SM snooping.
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
clear ipv6 pim tib
Clear the IPv6 PIM multicast-routing database (tree information base—TIB).
S5000
Syntax
clear ipv6 pim tib [group-address]
Parameters
group-address
(OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zero.
Defaults none
Command Modes EXEC Privilege
1000