Users Guide

Example:
Dell#power inline suspend stack-unit 1
Use the following command to check the suspended state.
Dell#show power inline stack-unit 1
% Error: Power to stack-unit 1 is in suspended state.
Dell#
To restore the power again, you can use the power inline restore stack-unit unit number
command. See Restore Power Delivery on a Port.
Restore Power Delivery on a Port
You can temporarily disable and then restore power on a port.
To disable the power delivery, see Suspend Power Delivery on a Port. To restore the suspended inline power,
use the power inline restore stack-unit unit number command.
Example:
Dell#power inline restore stack-unit 1
Use the following command to check the restored power:
Dell#show power detail stack-unit 1
Unit Total System Redundancy Inline Inline Inline Inline
Inline
Power Power Power Power Power Power Power
Power
Available Consumed Consumed Threshold Available Allocated Consumed
Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts)
(Watts)
-----------------------------------------------------------------------------------
-----
1 1100 150 0 10 95 0 0 95
Dell#
Display the Power Details
You can view the power allocated to a port and the power consumed by a port by using the following
commands.
To view the power allocated, use the show power inline {stack-unit unit number | interface
interface SLOT/PORT} command.
Example:
Dell#show power inline stack-unit 1
Global inline power Threshold : 10
Power Reserved for inline Power: 95W
Total Inline Power Consumed: 0W
Remaining inline power Available: 95W
Power over Ethernet (PoE) 701