Users Guide

* upgrade completes and unit gets reloaded successfully. Please do not*
* Reset/Powercyle or Reload. Proceed with caution ! *
***********************************************************************
Upgrade PoE Controller Firmware for stack-unit 1 ? [yes/no]: yes
PoE Controller upgrade in progress. Please do NOT POWER-OFF the card.
!
!
!
!
!
Upgrade result :
================
Slot 1 PoE Controller FirmWare upgrade successful. Resetting the stack-unit.
Dell#
2 Verify the PoE version bundled with the booted Dell Networking OS image.
Dell# show os-version
PoE-CONTROLLER IMAGE INFORMATION
---------------------------------------------------------------------
Type Version
PoE Controller 2.63
3 Verify the power details on the stack unit.
Dell#show power detail stack-unit 1
Dell#show power detail stack-unit 1
Unit Total System Redundancy Inline Inline Inline Inline
Inline
Power Power Power Power Power Power Power
Power
Available Consumed Consumed Threshold Available Allocated Consumed
Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts)
(Watts)
-------------------------------------------------------------------------------
---------
1 1100 150 0 99 940 0 0
940
Dell#
Manage Ports using Power Priority and
Power Budget
The allocation and return of power on ports depends on the total inline power available in the system and the
power priority calculation.
You can manage the power prioritization and the power allocation to the ports by using the power inline
priority and power budget commands. For more information about the commands, see the Dell
Networking OS Command Line Reference Guide
.
Power over Ethernet (PoE) 696