Users Guide

Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP configuration is per
interface on a switch-by-switch basis. Enable GVRP on each port that connects to a switch where you want
GVRP information exchanged. In the following example, GVRP is configured on VLAN trunk ports.
Figure 36. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1 Enabling GVRP Globally
2 Enabling GVRP on a Layer 2 Interface
GARP VLAN Registration Protocol (GVRP) 337