Users Guide

Viewing an ECMP Group
NOTE: An ecmp-group index is generated automatically for each unique ecmp-group when you
configure multipath routes to the same network. The system can generate a maximum of 512 unique
ecmp-groups. The ecmp-group indices are generated in even numbers (0, 2, 4, 6... 1022) and are for
information only.
You can configure ecmp-group with id 2 for link bundle monitoring. This ecmp-group is different from
the ecmp-group index 2 that is created by configuring routes and is automatically generated. These two
ecmp-groups are not related in any way.
Dell(conf-ecmp-group-5)#show config
!
ecmp-group 5
interface gigabitethernet 1/2
interface gigabitethernet 1/3
link-bundle-monitor enable
Dell(conf-ecmp-group-5)#
Equal Cost Multi-Path (ECMP) 317