Users Guide

OID String OID Name Description
.1.3.6.1.4.1.6027.3.10.1.2.5.1.8 chSysPortXfpTxPower OID displays the transmitting
power of the connected optics.
Temperature
.1.3.6.1.4.1.6027.3.10.1.2.5.1.7 chSysPortXfpRecvTemp OID displays the temperature of
the connected optics.
NOTE: These OIDs only
generate if you enable the
enable optic-info-
update-interval is
enabled command.
Hardware MIB Buffer Statistics
.1.3.6.1.4.1.6027.3.27.1.4 dellNetFpPacketBufferTable View the modular packet buffers
details per stack unit and the mode
of allocation.
.1.3.6.1.4.1.6027.3.27.1.5 dellNetFpStatsPerPortTable View the forwarding plane
statistics containing the packet
buffer usage per port per stack
unit.
.1.3.6.1.4.1.6027.3.27.1.6 dellNetFpStatsPerCOSTable View the forwarding plane
statistics containing the packet
buffer statistics per COS per port.
Troubleshooting Packet Loss
The show hardware stack-unit command is intended primarily to troubleshoot packet loss.
To troubleshoot packet loss, use the following commands.
•
show hardware stack-unit stack-unit-number cpu data-plane statistics
•
show hardware stack-unit stack-unit-number cpu party-bus statistics
•
show hardware stack-unit stack-unit-number drops unit unit-number
•
show hardware stack-unit stack-unit-number unit unit-number {counters | details
| port-stats [detail] | register | ipmc-replication | table-dump}
•
show hardware {ip | ipv6 | mac} {eg-acl | in-acl} stack-unit stack-unit-number
port-set 0 pipeline 0-3
•
show hardware ip qos stack-unit stack-unit-number port-set 0
•
show hardware system-flow layer2 stack-unit stack-unit-number port-set 0
{counters | pipeline 0-3}
•
show hardware drops interface interface
•
show hardware buffer-stats-snapshot resource interface interface
•
show hardware buffer inteface interface{priority-group { id | all } | queue
{ id| all} } buffer-info
•
show hardware buffer-stats-snapshot resource interface interface{priority-group
{ id | all } | queue { ucast{id | all}{ mcast {id | all} | all}
Debugging and Diagnostics 1144