CLI Guide

isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds]
[level-1 | level-2] command.
Parameters
seconds Interval of transmission time between CSNPs on multi-
access networks for the designated intermediate system.
The range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 1.
level-2 (OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 2.
Defaults seconds = 10; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
The default values of this command are typically satisfactory transmission times for
a specific interface on a designated intermediate system. To maintain database
synchronization, the designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.
Intermediate System to Intermediate System (IS-IS)
983