CLI Guide

• VmanQos : 0

• EtsAcl : 0

• FcoeAcl : 0

• iscsiOptAcl : 0

• ipv4pbr : 0

• vrfv4Acl : 0

• Openflow : 0

• fedgovacl : 0

• nlbclusteracl: 0

Allocate space to each CAM region.

Enter the CAM profile name then the amount of CAM space

to be allotted. The total space allocated must equal 13. The

ipv6acl range must be a factor of 2.

Enter 4 or 8 for the number of OpenFlow FP blocks.

• 4: Creates 242 entries for use by the OpenFlow

controller (256 total entries minus the 14 entries

reserved for internal functionality)

• 8: Creates 498 entries for use by the OpenFlow

controller (512 total entries minus the 14 entries reserved

for internal functionality)

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.2(0.2) Added support for the fcoe parameter on the S4810 and

S4820T.

9.1.(0.0) Added support for OpenFlow on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Added the keywords fcoeacl and iscsioptacl on the

S4810.

Control and Monitoring