CLI Guide

• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Version 6.3.1.0 Introduced
Usage Information
You cannot disable leaking from Level 1 to Level 2. Also, you cannot enable leaking
from Level 2 to Level 1. However, you can regulate the rate flow from one level to
another using an IP Prefix list. If you do not configure the IP Prefix list, all Level 1
routes are leaked.
You can find more information in IETF RFC 2966, Domain-wide Prefix Distribution
with Two-Level IS-IS.
area-password
Configure a hash message authentication code (HMAC) password for an area.
Syntax
area-password [hmac-md5 | encryption-type] password
To delete a password, use the no area-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter a 1 to 16-character length alphanumeric string to
prevent unauthorized access or incorrect routing
information corrupting the link state database. The
954
Intermediate System to Intermediate System (IS-IS)