CLI Guide

port-channel (OPTIONAL) Enter the keywords port-channel if the
backup port is a static or dynamic port channel.
mode (OPTIONAL) Enter the keyword mode to set the interface
mode.
private-vlan (OPTIONAL) Enter the keywords private-vlan to set the
interface mode to private VLAN mode.
host (OPTIONAL) Enter the keyword host to set the private VLAN
interface to host mode.
promiscuous (OPTIONAL) Enter the keyword promiscuous to set the
private VLAN interface to promiscuous mode.
trunk (OPTIONAL) Enter the keyword trunk to set the private
VLAN interface to trunk mode.
Defaults Disabled — interface is in Layer 3 mode.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.1.0 Added support for port-channel interfaces (the port-
channel number option).
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.7.1.0 Added the backup interface option.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Interfaces
789