CLI Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Example
Dell# show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Gi 1/2 Up 0 0 20 800 4500 120
Gi 1/10 Up 0 0 5 750 2500 20
Dell#
Related
Commands
• dampening — configure dampening on an interface.
• show interfaces — display information on a specific physical interface or virtual
interface.
• show interfaces configured — display any interface with a non-default
configuration.
show interfaces phy
Display auto-negotiation and link partner information.
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
gigabitethernet Enter the keyword gigabitethernet then the slot/port
information.
tengigabitethernet Enter the keyword tengigabitethernet then the slot or
port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
768
Interfaces