CLI Guide

Parameters
flash:
To delete a file or directory on the internal flash, enter
flash:// then the filename or directory name
([flash://]filepath).
nfsmount: To delete a file or directory on the NFS-mounted file
system, enter nfsmount:// then the mount point and the
file path (nfsmount://filepath).
NOTE: While deleting a file directory on a remote NFS
file system, you must specify the mount-point that
indicates the working directory on the NFS file system.
You cannot delete the root directory of the remote NFS
file system.
usbflash:
To delete a file or directory on the external USB flash, enter
usbflash:// then the filename or directory name
([usbflash://]filepath).
no-confirm (OPTIONAL) Enter the keywords no-confirm to specify
that the Dell Networking OS does not require user input for
each file prior to deletion.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON. Added support for NFS
mount.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
File Management
67