CLI Guide

4080 bytes successfully copied

Dell#

In this copy scp: flash: example, specifying SCP in the first position indicates

that you need to specify the target in the ensuing prompts. Entering flash: in the

second position indicates that the target is the internal flash. The source is on a

secure server running secure shell (SSH), so you are prompted for the user

datagram protocol (UDP) port of the SSH server on the remote host.

Example

Dell# copy running-config nfsmount://<mount-point>/filepath

Destination file name [test.txt]:

User name to login remote host: usrname

Password to login remote host:

Dell#

Example

Dell# copy scp: flash:

Address or name of remote host []: 10.11.199.134

Port number of the server [22]: 99

Source file name []: test.cfg

User name to login remote host: admin

Password to login remote host:

Destination file name [test.cfg]: test1.cfg

Dell#

Example

Dell# copy compressed-config compressed-cfg

6655 bytes successfully copied

Dell#

Dell#copy compressed-config ftp:

Address or name of remote host []: 10.11.8.12

Destination file name [startup-config]:

User name to login remote host: spbalaji

Password to login remote host:

6655 bytes successfully copied

Dell#

Example

Dell# copy http://admin:admin123@10.16.206.77/sample_file

flash://sample_file

Dell#

Commands

• cd – changes the working directory.

delete

Delete a file from the flash. After deletion, files cannot be restored.

Syntax

delete {flash: | nfsmount: | usbflash:} [no-confirm]

File Management