CLI Guide

show link-bundle distribution
Display the link-bundle distribution for the interfaces in the bundle, type of bundle (LAG or ECMP), and
the most recently calculated interface utilization (either bytes per second rate or maximum rate) for each
interface.
Syntax
show link-bundle-distribution
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Example
Dell# show link-bundle-distribution
Link-bundle trigger threshold - 30
ECMP bundle - 64 Utilization[In Percent] - 0 Alarm
State - Inactive
Interface Line Protocol Utilization[In
Percent]
Gi 1/1 Up 0
Po 128 Up 0
Po 100 Up 0
Dell#
Equal Cost Multi-Path (ECMP)
647