CLI Guide

• crc32LSB: Use CRC32_LOWER — LSB 16 bits of
computed CRC32
• crc-upper: Uses the upper 32 bits of the key for the
hash computation
• dest-ip: Uses the destination IP for ECMP hashing
• lsb: Returns the LSB of the key as the hash
• xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16 bit XOR
lag Enter the keyword lag and then one of the following
options:
• crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync
polynomial (default)
• crc16cc: Use CRC16_CCITT — 16 bit CRC16 using
CRC16-CCITT polynomial
• crc32MSB: Use CRC32_UPPER — MSB 16 bits of
computed CRC32
• crc32LSB: Use CRC32_LOWER — LSB 16 bits of
computed CRC32
• xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16 bit XOR
seed Enter the keyword seed and the seed value of the hash
algorithm. The value ranges from 0 to 2147483646.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
Equal Cost Multi-Path (ECMP)
641