CLI Guide

IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use
the [no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to
which the server is leasing the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
ipv6 ipv6-address Enter the keyword ipv6 then the IPv6 address that is leased
to the client.
interface type Enter the keyword interface then the type of interface to
which the host is connected:
• For a 1-GigabitEthernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
interface number Enter the number of the interface.
lease value Enter the keyword lease then the amount of time the IPv6
address are leased. The range is from 1 to 4294967295.
Defaults None
Command Modes
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Dynamic Host Configuration Protocol (DHCP)
621