CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

571

572

573

574

575

576

577

578

579

580

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.0 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

Usage Information This command enables a hardware watchdog mechanism that automatically

reboots an Dell Networking OS switch/ router with a single unresponsive unit. This

behavior is a last-resort mechanism intended to prevent a manual power cycle.

show hardware mac

Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.

Syntax

show hardware mac {eg-acl | in-acl} stack-unit id port-set 0–0

Parameters

eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to

select between ingress or egress ACL data.

stack-unit id Enter the keyword stack-unit to select the stack unit ID.

port-set 0–0 Enter the keywords port-set with a port-pipe number to

display the MAC ACL entries for the specified port-pipe

number. . The range is from 0 to 0.

Defaults None

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.