CLI Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information
This command is a knob to disable BGP next-hop resolution using BGP learned
routes. During the next-hop resolution, only the first route that the next-hop
resolves through is verified for the route’s protocol source and is checked if the
route is learned from BGP or not.
The clear ip bgp command is required for this command to take effect and to
keep the BGP database consistent. Execute the
clear ip bgp command right
after executing this command.
Related
Commands
• clear ip bgp — clear the ip bgp.
bgp regex-eval-optz-disable
Disables the Regex Performance engine that optimizes complex regular expression with BGP.
Syntax
bgp regex-eval-optz-disable
To re-enable optimization engine, use the no bgp regex-eval-optz-disable
command.
Defaults Enabled
Command Modes ROUTER BGP (conf-router_bgp)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
Border Gateway Protocol
431