CLI Guide

Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 6
Dell#
Related
Commands
• bfd all-neighbors — establish BFD sessions with all neighbors discovered by the
IS-IS protocol or OSPF protocol out of all interfaces.
vrrp bfd neighbor
Establish a BFD for VRRP session with a neighbor.
Syntax
vrrp bfd neighbor ip-address
To remove the BFD session with the neighbor, use the no vrrp bfd neighbor
ip-address command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format (A.B.C.D).
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for VLAN and port-channel interfaces on the
E-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
• show bfd neighbors — display the BFD neighbor information on all interfaces or
a specified interface.
Bidirectional Forwarding Detection (BFD)
405