CLI Guide

The following sample output is displayed when using the show acl-vlan-group
group-name option.
NOTE: The access list name is truncated.
Dell# show acl-vlan-group TestGroupSeventeenTwenty
Group Name Egress IP Acl Ingress IP Acl Ingress
IPV6 Acl Vlan Members Test
- test -
1-100
The following sample output shows the line-by-line style display when using the
show acl-vlan-group detail option.
NOTE: No group or access list names are truncated
Dell# show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL
platforms
Usage Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the
system to enable the settings to be stored in nonvolatile storage. During the
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
379