CLI Guide

debug dot1x
Display 802.1X debugging information.
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface interface]
Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface interface Restricts the debugging information to an interface.
Defaults Disabled
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
dot1x auth-fail-vlan
Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
200
802.1X