CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Gi 0/5 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Gi 0/5 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Te 1/5/1 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Te 1/5/1 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
Dell#
show ethernet cfm maintenance-points remote
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {level | name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in
active state.
domain [name |
level]
Enter the keyword domain then the domain name or
domain level.
802.1ag
191