CLI Guide

65
Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking OS.
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 255.
The default is 1 second.
centisecs
centisecs
Enter the keyword centisecs then the number of
centisecs in multiples of 25 centisecs. The range is 25 to
4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs.
Command Modes INTERFACE-VRRP
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Added support for centisecs on the Z9000, S6000, S4820T,
S4810, and MXL.
1852
Virtual Router Redundancy Protocol (VRRP)