CLI Guide

igmp-snoop Enter the keywords igmp-snoop to display the IGMP
snooping VLT statistics.
mac Enter the keyword mac to display the VLT MAC addresses
VLT statistics.
multicast Enter the keyword multicast to display the multicast VLT
statistics.
ndp Enter the keyword ndp to display the NDP VLT statistics.
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Added parameters multicast and ndp
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added support in the output for ARP, MAC, and IGMP
snooping.
8.3.8.0 Introduced on the S4810.
Related
Commands
• clear vlt statistics — clears the statistics on VLT operations.
Example
NOTE: The following example shows the statistics for all the VLT parameters. If
you enter a specific keyword, such as mac, only the statistics for that VLT
parameter displays.
Dell_VLTpeer1# show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent: 930
HeartBeat Messages Received: 909
ICL Hello's Sent: 927
ICL Hello's Received: 910
Domain Mismatch Errors: 0
Version Mismatch Errors: 0
Config Mismatch Errors: 0
Virtual Link Trunking (VLT)
1845