CLI Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
The proxy-gateway feature may go operationally down for any of the following
reasons:
• LLDP is globally disabled.
• LDP is disabled per port.
• VLT port-channel is down.
• LLDP neighbor is down.
If any of these conditions is true, the proxy-gateway feature could be operationally
down. If so, it is shown in the show command output.
When more than one VLT port-channel terminates on the same ToR, the show
VLT proxy-gateway info lldp command output may show the port-channel
ID incorrectly.
Example
Dell#show vlt proxy-gateway
VLT Proxy Gateway Brief
-------------------------
Config Mode: LLDP
Global LLDP Config Status: Enabled
peer-mac-transmit Status: Disabled
Dell#show vlt proxy-gateway info static
Mac Address Exclude Vlan
----------- ------------
00:01:e8:8a:e8:f7 3,7-8
00:01:e8:8b:1c:c0 3,7-8
Dell#show vlt proxy-gateway info lldp
LagId Mac Address Exclude Vlan
----- ----------- ------------
Po 55 00:01:e8:8a:e8:f7 3,7-8 << Macs learnt via port-channel
VLT Proxy Gateway
1825