CLI Guide

VLT Proxy Gateway

The virtual link trucking (VLT) proxy gateway feature allows a VLT domain to locally terminate and route

L3 packets that are destined to a Layer 3 (L3) end point in another VLT domain. Enable the VLT proxy

gateway using the link layer discover protocol (LLDP) method or the static configuration. For more

information, see the Dell Networking OS Command Line Reference Guide.

proxy-gateway lldp

Enables the proxy-gateway feature using the LLDP protocol.

Syntax

[no] proxy-gateway lldp

Command Modes VLT DOMAIN

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

Usage Information The configuration is cached and sent to LLDP only in one of the following

conditions:

1. The port-channel connecting the two VLT domains, across the DC, is a VLT

LAG.

2. The protocol lldp command is globally enabled.

3. The proxy-gateway LLDP configuration is applied.

VLT Proxy Gateway

1819