CLI Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series and S-Series.
E-Series original
Command
Usage Information
Prior to disabling the stackable VLAN feature, remove the members.
To view the stackable VLANs, use the show vlan command in EXEC Privilege
mode. Stackable VLANs contain members, designated by the M in the Q column of
the command output.
If you enabled VRF, you cannot enable the stacked VLAN feature using this
command.
If you enabled IGMP snooping, you cannot enable the stacked VLAN feature using
this command.
Example
Dell# show vlan
Codes: * - Default VLAN, G - GVRP VLANs
NUM Status Q Ports
* 1 Inactive
2 Active M Gi 1/13
M Gi 1/1-3
3 Active M Po1(Gi 1/14-15)
M Gi 1/18
M Gi 1/4
4 Active M Po1(Gi 1/14-15)
M Gi 1/18
M Gi 1/5
5 Active M Po1(Gi 1/14-15)
M Gi 1/18
M Gi 1/6
Dell#
1800
VLAN Stacking