CLI Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Added the tunnel source anylocal command.
9.3(0.0) Introduced on the S4810, S4820T, S6000 and Z9000.
Usage Information
Added an optional keyword “anylocal” to the tunnel source command. The
anylocal argument can be used in place of the ip address or interface, but only with
the multipoint receive-only mode tunnels. The tunnel source anylocal command
allows the multipoint receive-only tunnel to decapsulate tunnel packets addressed
to any IPv4 or IPv6 (depending on the tunnel mode) address configured on the
switch that is operationally Up.
1780
Tunneling