CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added IPv6 support.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
You can configure multiple time-serving hosts. From these time-serving hosts, the
Dell Networking OS chooses one NTP host with which to synchronize. To
determine which server is selected, use the show ntp associations command.
Because many polls to NTP hosts can affect network performance, Dell
Networking recommends limiting the number of hosts configured.
Related
Commands
• show ntp associations — displays the NTP servers configured and their status.
ntp source
Specify an interface’s IP address to be included in the NTP packets.
Syntax
ntp source interface
To delete the configuration, use the no ntp source command.
Parameters
interface Enter the following keywords and slot/port or number
information:
1762
System Time and Date