CLI Guide

ntp authentication-key
Specify a key for authenticating the NTP server.
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number Specify a number for the authentication key. The range is
from 1 to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
md5 Specify that the authentication key is encrypted using MD5
encryption algorithm.
0 Specify that authentication key is entered in an unencrypted
format (default).
7 Specify that the authentication key is entered in DES
encrypted format.
key Enter the authentication key in the previously specified
format.
Defaults NTP authentication is not configured by default. If you do not specify the option [0
| 7], 0 is selected by default.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Added options [0 | 7] for entering the authentication key.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
System Time and Date
1757