CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
traceroute
View a packet’s path to a specific device.
Syntax
traceroute {host | vrf instance | ip-address | ipv6-address}
Parameters
host Enter the name of device.
vrf instance (Optional) E-Series Only: Enter the keyword vrf then the
VRF Instance name.
ip-address Enter the IP address of the device in dotted decimal format.
ipv6-address Enter the IPv6 address, in the x:x:x:x::x format, to which you
are testing connectivity.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults
• Timeout = 5 seconds
• Probe count = 3
Control and Monitoring
175