CLI Guide

• aes192-cbc : Force ssh to use aes192-cbc encryption
cipher
• aes256-cbc : Force ssh to use aes256-cbc encryption
cipher
• aes128-ctr : Force ssh to use aes128-ctr encryption
cipher
• aes192-ctr : Force ssh to use aes192-ctr encryption
cipher
• aes256-ctr : Force ssh to use aes256-ctr encryption
cipher
-l username (OPTIONAL) Enter the keyword -l then the user name used
in this SSH session. The default is the user name of the user
associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2
clients only):
"no fips mode enable"(disable) will support v1 & v2 client.
• hmac-md5: Force ssh to use hmac-md5 HMAC
algorithm.
• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC
algorithm.
• hmac-sha1: Force ssh to use hmac-sha1 HMAC
algorithm.
• hmac-sha1-96 : Force ssh to use hmac-sha1-96
HMAC algorithm.
• hmac-sha2-256 : Force ssh to use hmac-sha2-256
HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword -p then the port number.
The range is from 1 to 65535. The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or
2. The default is the version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
Security
1617