CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1601

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.5(0.0) Introduced on the Z9500.

9.4(0.0) Introduced on the S-Series and Z9000.

Usage Information

The source-interface interface attribute is applicable for both the SSH

client as well as the COPY (SCP) commands. Using these attributes the client

session tags an error to the user during run time, in case there is a mismatch

between this command and the

ip ssh vrf command.

Example

Dell(conf)#ip ssh source-interface gigabitethernet 1/47

Dell(conf)#do ssh 10.10.10.2 -l admin

Dell(conf)#no ip ssh source-interface

ip ssh vrf

Specify a VRF for an outgoing SSH connections.

Syntax

ip ssh vrf vrf-name

To delete a VRF for an outgoing SSH connection, use the no ip ssh vrf vrf-

name command.

Parameters

vrf vrf-name Enter the keyword vrf and then the name of the VRF to

configure that VRF for an outgoing SSH session.

Defaults Not configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.