CLI Guide

If the RADIUS group is not configured for Authentication, Authorization, and
Accounting, then globally configured Radius servers are used for the purposes.
When the RADIUS group is removed, the AAA configuration is also removed.
Example
Dell(conf)# radius-server group group1
Dell(conf-radius-group)# radius-server host 1.1.1.1 key secret
Dell(conf-radius-group)# radius-server host 2.2.2.2 key secret
Dell(conf-radius-group)# radius-server vrf vrf1 source-
interface gigabitethernet 1/36
Dell(conf)# exit
Dell(conf)# aaa radius group group1
show accounting
Display the active accounting sessions for each online user.
Syntax
show accounting
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Added support for roles on the Z9500.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Introduced on the E-Series.
Usage Information This command steps through all active sessions and then displays the accounting
records for the active account functions.
Security
1533