CLI Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
pre- 6.2.1.1 Introduced on the E-Series.
redistribute ospf
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [match external {1 | 2} | match
internal | metric metric-value] [route-map map-name]
To disable redistribution, use the no redistribute ospf process-id [match
external {1 | 2} | match internal | metric metric-value]
[route-map map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to
redistribute. The range is from 1 to 65355.
match external {1 |
2}
(OPTIONAL) Enter the keywords match external then the
numbers 1 or 2 to indicated that external 1 routes or
external 2 routes should be redistributed.
match internal (OPTIONAL) Enter the keywords match internal to
indicate that internal routes should be redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as
the metric value. The range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Routing Information Protocol (RIP)
1485