CLI Guide

…
13 1 L2ACL 400 200
Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
Syntax
threshold min number max number max-drop-probability
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number Enter the keyword min then the minimum threshold
number for the WRED profile. The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold
number for the WRED profile. The range is from 1 to 9360
KB.
max-drop-
probability
number
Enter the keyword max-drop-probability followed by the
maximum number of packets for the WRED profile. The
range is from 0 to 100 KB
Defaults none
Command Modes CONFIGURATION (config-wred)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Quality of Service (QoS)
1451