CLI Guide
Field Description
Inline Power
Allocated
Displays the amount of power allocated to the port.
Inline Power
Consumed
Displays the amount of power consumed by the connected
device.
Class
Displays the power classification of the connected device. If
the device is powered up properly, it displays Class 0, 1, 2, 3,
or 4. Displays the following under different conditions:
• NO_DEVICE if no device is present.
• LEGACY if a legacy device is connected.
• PD_S/C if a short-circuit condition is detected.
• PD_OVRLD if overload condition is detected.
Device Type Displays whether the device is Type 1 or Type 2.
PoE Port Priority Displays the power configured for the port (default is low).
See power inline priority.
LLDP Support Displays the power requested is via LLDP-MED extended
power-via-mdi TLV or IEEE 802.3at power-via-mdi TLV.
Example
Dell#show power inline stack-unit 1
Global inline power Threshold : 10
Power Reserved for inline Power: 95W
Total Inline Power Consumed: 0W
Remaining inline power Available: 95W
Power Management Mode: Class
Interface Inline Power Inline Power Class Device PoE
Port LLDP
Max / Alloc Consumed Type
Priority Support
(Watts) (Watts)
--------- ------------ ------------ ------- ------
-------- ------
Gi 1/1 0.00 /0.00 0.00 NO_DEVICE
- high
Dell#
1368
Power over Ethernet (PoE)